LDC Series POWR-PRO ® Class L Fuses
600 V AC/DC Time-Delay 150 2000 Amperes
constants. This makes the fuse uniquely suited for applications such
as crane rail circuits and mass transit systems. Contact the factory for
For AC only systems, consider the use of POWR-PRO KLPC series
fuses. They have a full 10 seconds time-delay at 500% rated current,
and have a wider range of ratings.
UPS protection, especially for large battery circuits
DC variable speed drives
Protection of crane rail circuits and other large DC equipment such as
electrical power shovels, ship and dock cranes, etc.
Mass transit systems, including new light rail applications
General purpose AC/DC circuits for mains, feeders, and branch circuits
Littelfuse POWR-PRO LDC series Class L fuses represent another
first in fuse protection. LDC series fuses are the first UL Listed 600
volts AC and DC Class L fuses. Since they may be used for both
AC and DC, they eliminate the concern that AC only fuses may be
inserted into DC circuits.
600 Volt AC/DC rated All-purpose Class L fuses reduce
inventory requirements because the need for separate AC and DC
fuses is eliminated.
UL Listed 200,000 A.I.R. AC 50,000 A.I.R. DC Reliable
interruption of all overcurrents up to their ratings. Minimizes the need
for time consuming and expensive short-circuit studies.
Moderate time-delay Four seconds time-delay at 500% current
provides adequate time-delay for many AC applications and most
DC applications. They will withstand most harmless overloads or line
surges. If your needs exceed the LDC capabilities, consider the use
of KLPC fuses for AC applications.
Selective coordination LDC series fuses coordinate well with all
Littelfuse fuses rated 600 amperes or less. A combination of LDC
and IDSR series fuses provide a complete 600 volt rated DC system.
Extremely current-limiting Maximum current limitation reduces
damage to circuits and equipment under short-circuit conditions.
Stops damaging short-circuits faster than any mechanical protective
While LDC series fuses UL Listed DC interrupting rating is more than
adequate for most applications (50,000 amperes at a 16 millisecond
time constant), tests in our high power laboratory have shown that
this remarkable fuse is capable of performing at much longer time
AC: 600 Volts
DC: 600 Volts
AC: 200,000 amperes rms symmetrical
DC: 50,000 amperes
(16 millisecond time-constant)
150 2000 amperes
Standard 248-10, Class L
UL Listed 601 2000 amps (File No: E81895)
Example part number (series & amperage): LDC 1200
UL Recognized 150 600 amps
(File No: E71611)
CSA Certified 150 2000 amps
(File No: LR29862)
Please refer to the KLPC dimensions
© 2005 Littelfuse POWR-GARD Products Catalog