SEARCH PRODUCT
Communications & Instruments
DIGITAL THERMOMETER
Temperature Range: -58 to 2000F (-50 to 1300C)
User selectable C or F
User selectable 0.1C or 1C (0.1F or 1F) resolution
Accuracy to 0.5%
Display maximum reading plus Data Hold
Large LCD display
with backlight
Accept K-type thermocouples
Includes 9 V battery and holster
HX382 is a dual input
thermocouple thermometer
that provides differential
temperature measurements
DIGITAL THERMOMETER
Rugged design for field use - includes rubber holster
Accurate to 0.3%
C/F switchable
Front panel offset adjustment
to optimize accuracy
Displays maximum reading plus
data hold on large LCD display
Includes 9V battery, holster
with stand, wrist strap
TEMPERATURE
Range: -50 to 1300C /-58 to 2000F
Accuracy: 0.3% rdg + 1C; > 1000C -
(0.5%)/0.3% rdg + 2F
Resolution: 0.1 or 1 (user selectable)
Dimensions: 6.5 x 3.0 x 1.7"
(165 x 76 x 43 mm
including holster)
SPECIFICATIONS
Order No.
HX381
HX382
Weight:
14.2 oz (403 g)
HX381
HX382
MODEL NO. HN208 DELUXE
Complete digital thermometer kit includes
model HX392 digital thermometer, air, sur-
face and general purpose probe all in a
hard carrying case for easy transportation.
Mfg. No.
ST-610B
ST-612
Temperature Range: -50 to 1300C
-58 to 2000F
Resolution:
1C/F or 0.1C/F
Accuracy:
(0.5 % rdg. 1C/2F)
Humidity Range:
0 to 100% RH
Order No. Description
HX392
Resolution:
0.1% RH
Accuracy:
3.5% RH
Digital Thermometer, Type "K", Single Input
Power Supply:
1 x 9V battery
HN208
Thermometer Kit incl. air, surface
and general purpose probes and case
Dimensions:
165 x 76 x 43 mm (HWD)
Weight:
403 g
HN215
5 point NIST Certificate
SURFACE PROBES
AIR/GAS PROBE
Ribbon-style surface probe
Maximum Temperature: 400C
Order No. HN209
Mfg. No. LS-109
Specially designed to measure air or gases in heating
and cooling units, ovens and engine exhausts
Perforated shield permits fasts response while
providing exceptional element protection
Maximum Temperature: 800C
Order No. HN212 Mfg. No. LS-103
Spring-loaded probe is ideal for high temperature
surface measuring requirements
Extremely fast response time
Not recommended for use as an immersion probe
Maximum Temperature: 500F
Order No. HN210
Mfg. No. LS-139
NEEDLE TIP
PENETRATION PROBE
Medium gauge hypodermic needle tip, used
to measure softer food stuffs, rubbers and solids
Ideal for use in industrial, laboratory and
chemical environments
Maximum Temperature: 800F
Order No. HN213 Mfg. No. LS-134A
RIGHT ANGLE
SURFACE PROBE
GENERAL PURPOSE
IMMERSION PROBE
Unique right angle design allows temperature of
hard to reach areas to be taken
Great for monitoring temperature inside pipes, also
flat surfaces, without keeping hands over heated area
Maximum Temperature: 400C
Order No. HN211
Mfg. No. LS-104
Used to measure both air or liquids, but is best
recommended for immersion applications
Excellent for checking temperature of oils,
water and non-corrosive fluids
Maximum Temperature: 700C
Order No. HN214 Mfg. No. LS-107