SEARCH PRODUCT
Respiratory
Abrasi-BlasT TM
Supplied-Air Respirator
Provides respiratory and upper body protection in
applications where blasting with abrasives is performed
Complete Abrasi-Blast TM respirator is made up of a hood, facepiece
with lens housing, breathing tube, cover lens cartridge assembly,
flow-control device, approved air-supply hose, and support belt
Hypalon hood with collar
Choice of waist-length or shoulder-length hoods
During blasting, the lens is protected by 2 to 4 flat
glass cover lenses mounted in a special foam material
Each cover lens is removed by integral pull-tabs
when it becomes so abraded that vision is reduced
No need to stop and change lenses
Air supply hose ordered separately
Approved by NIOSH and MSHA
SAM976
SAM972
Inlet Pressure Range
Waist-Length Hypalon Hood with Collar
SAM972
Mfg. No.
468716
10 - 15 PSI
SAM973
468718
35 - 40 PSI
SAM974
474263
60 - 80 PSI (Vortex tube)
Air Supply Hose (SOLd separately)
Order No. Mfg. No.
Neoprene
SAM975
485751
Pressure-Demand
Hose
Shoulder-Length Hypalon Hood with Collar
SAM976
SAM980 481071
8' Neoprene
SAM981 455020
15' Neoprene
468720
10 - 15 PSI
SAM982 455021
25' Neoprene
SAM977
468722
35 - 40 PSI
SAM983 455022
50' Neoprene
PVC
SAM978
474264
60 - 80 PSI (Vortex tube)
SAM984 481051
8' PVC
Pressure-Demand
* Complete assemblies with Hypalon hood include: one lens cartridge
consisting of four 0.06-inch untempered glass cover lenses, flow control
device, Snap-Tite aluminum quick-disconnect fitting, adjustable valve-
connector body, or pressure-demand regulator (with socket assembly),
facepiece (medium) with dual exhalation valves and lens housing,
breathing tube, web belt, and air-hose connector.
485755
SAM985 471511
15' PVC
SAM986 471512
25' PVC
SAM987 471513
50' PVC
100' PVC
SAM989 491513 8' Coiled Nylon
SAM990 491514 15 ' Coiled Nylon
SAM991 491515 25 ' Coiled Nylon
SAM992 474043 50 ' Coiled Nylon
Additional Hood Options
Order No. Mfg. No.
Coiled Nylon
Replacement Lens Cartridges
Order
Mfg.
Lenses
Description
No.
No.
Lens Description
/Cart. Recommended Use
SAN001 473238 0.06" thick, untempered 4
Light blasting
SAM993 468724 Hypalon waist
SAM994 468725 Hypalon shoulder
SAM995 480699 Duck Cloth chest
SAM996 480697 Duck Cloth waist
SAM997 486304
SAN002 473240 0.06" thick, tempered
4
Light blasting plus added protection
against glass breakage
SAN003 473798 0.09" thick, untempered
3
Medium blasting
SAN004 473800 0.09" thick, tempered
3
Medium blasting, plus added protection
Neoprene shoulder
against glass breakage
SAM998 486303
Neoprene waist
SAN005 * 473802 0.12" thick, untempered 2 Heavy blasting
Knit-back,
hypalon front, shoulder
SAN006 * 481742 0.12" thick, untempered 3 Heavy blasting
*Two layers laminated
TransAire tm 5, TransAire tm 10, &
Custom Air V Escape Respirators
Description
Assembly includes cylinder, carrier,
hood tube and hood assembly
SAN007 10008292 TransAire TM 5 Escape Respirator
SAN008 10008293 TransAire TM 10 Escape Respirator
SAN009 484353
No.
SAN010 802197
Custom Air TM V Escape Respirator w/carbon fibre cylinder
When you need to get out quickly
Delivers consistent air supply
at 40 Lpm (litres per minute)
TransAire TM 10 is pressurized to 3000 PSIG
TransAire TM 5 is pressurized to 2216 PSIG
Compact units use aluminum cylinders that
can withstand temperatures from 0 to 160F
Custom Air V is designed with a high flow rate
(72 Lpm) for extremely aerobic escape application
Accessories
SAN011 10012530 Single-unit carrying case, black
SAN012 485816 Carrying/wall-mounting case
SAN013 696192 Single-unit wall mounting case
SAN014 696193 Two-unit wall mounting case
SAN015 474929 Wide shoulder strap for Custom Air V
18235E
127
Order No. *
SAM979
SAM988 484225
SAM999 486329
No.
Complete Assemblies
Order Mfg.
Custom Air TM V Escape Respirator w/aluminum cylinder